512Hz Underground Pipe Locator with LED Display, Handheld Pipeline Detector for Water Blockage Detection, Efficient Exploration Work

Spec: Item Type: Underground Pipe Locator Working Frequency: 512Hz Modulation: None Battery: 6 x AA Batteries (Not Included) Usage Time: 4 Hours Intermittent Use Sound Output: 50-1000Hz Depending on Strength Operating Temperature: -20℃ to 60℃ Assembled Length: Approx. 535mm / 21.06in Sensor: Separation angle sensor for peak and zero acquisition Weight: Approx. 1805.00g / 63.67oz Package List: 1 x Detector 1 x Detector Accessories 1 x User Manual 1 x Earphone 1 x Aluminum Case Note: 512 has only one mode, the 'detector' mode. In detector mode, the receiver searches for transmitted by a small probe or camera with a built in transmitter that is wired through pipes. The detector must emit a 512Hz , and the receiver can determine the approximate depth of the target. First, turn on the receiver, walk around keeping the receiver at waist height, then walk towards the general direction of the transmitter while slowly sweeping the receiver backwards while pointing towards the transmitter. You will notice the getting stronger. As you get closer, adjust the sensitivity as needed to keep it within range. When you cannot keep the meter below full scale, switch to 'near' and continue moving towards the direction of the stronger . When you reaching the point where the seems strongest, moving in any direction will weaken it, and then you know you have found the detector directly below the antenna pole. Move to another location, search for this peak again, see if you always return to the same spot for confirmation. If you correctly perform each step, you should consistently find yourself right the transmitter each time. Keep practicing until you get consistent results. The product does not include a transmitter and requires a 512Hz transmitter to be used.

• [Clear Monitoring] Led screen provides clear data for convenient monitoring, enhancing the overall exploration experience.
• [Versatile Usage] Ideal for water supply, cable pipes, underground construction, cave exploration, and underwater research, making exploration efficient.
• [Precise Location] 512Hz transmitter facilitates easy probe location determination, while the tilt sensor ensures peak and zero acquisition.
• [ Design] Made of premium abs material, this water- locator is for underwater measurements, guaranteeing long-lasting performance.
• [Enhanced Detection] Equipped with a built-in sensing coil to receive magnetic from pipes, this locator accurately calculates transmitter position.